This project requires intermediate knowledge of LEDs, soldering, and circuits. Soldering is optional but certainly would make for a more reliable lighting system. The system consists of a 12v battery pack, a rocker switch, and 4 12-volt LED power lines that must all be wired in parallel (12V goes to each of the sets individually, not one after another.)

As provided:

Depth: 157mm (6.2")

Width: 524mm (20.6")

Height: 273mm (10.8")

The files are designed for FDM printing and use the following hardware + electronics: Please note that some of these items are probably available in lower quantities for better prices at a local hardware or electronics store!

12 x M4x16mm SHCS https://www.mcmaster.com/91290a154 2 x M6x18 SHCS https://www.mcmaster.com/91290a323

Approximately 14" black 1/2" rubber cord stock or other flexible tube, similar but not limited to the following link https://www.mcmaster.com/9407k22

2 x 12 volt 40mm blue (or color you choose) angel eye LED ring http://a.co/d/bZuvd5f

1 x 12 volt AA battery pack http://a.co/d/fC997AU <-- this is a pack of 2, you need only one.

1 x 12 volt pigtail http://a.co/d/4hk1wAy <-- this is a pack of 10, you only need one

2 x 12 volt blue (or color you choose) 3mm LED http://a.co/d/26JBh2Z <-- this is a pack of 20

1 x rocker switch https://www.sparkfun.com/products/11138 (optional - the AA battery holder does come with an integrated switch. This rocker switch fits into the top of the battery door and allows easy power control)

LED Lens 1 and Triangle Lens should be printed in translucent blue (or color you choose) material or laser cut acrylic if possible. DXFs included!

Duplicate part names and quantities:

8 x LED lens

1 2 x Triangle Lens

4 x Thruster Rail

2 x Thruster Outlet

2 x Thruster Heatsink Brace

2 x Thruster Heatsink

2 x Center Tube A

2 x Center Tube B

2 x Center Tube C

2 x Arrow Vent

2 x Canister Half

4 x Hose Connector

2 x LED Brace