Stabby Stab Stab

Screen Shot 2020-07-25 at 13.54.13.png
Screen Shot 2020-07-25 at 14.09.17.png
Screen Shot 2020-07-25 at 14.08.38.png
Screen Shot 2020-07-25 at 14.13.54.png
Screen Shot 2020-07-25 at 14.10.05.png
Screen Shot 2020-07-25 at 14.12.53.png
Screen Shot 2020-07-25 at 14.13.34.png
Screen Shot 2020-07-25 at 14.35.21.png
Screen Shot 2020-07-25 at 13.54.13.png
Screen Shot 2020-07-25 at 14.09.17.png
Screen Shot 2020-07-25 at 14.08.38.png
Screen Shot 2020-07-25 at 14.13.54.png
Screen Shot 2020-07-25 at 14.10.05.png
Screen Shot 2020-07-25 at 14.12.53.png
Screen Shot 2020-07-25 at 14.13.34.png
Screen Shot 2020-07-25 at 14.35.21.png

Stabby Stab Stab

$10.00

This item consists of digital 3D printable files. Like all of my other items, you will not receive anything physical from me if you buy this.

Do you want to poke yourself and those around you when handling a replica? Look no further!

Green and white paint required for skulls and stars decorations.

All other parts are print-by-color: black, gray/silver, dark gray, red. Part colors and quantities are in file names!

One of the parts is quite large but will fit in a Prusa Mk3 diagonally. Please see photos for dimensions.

After printing the spikes, I gently used a heat gun to get rid of stringing and soften the tips.

Add To Cart

Hardware required:

2 x 1/8” THK 3/8” DIA NdFeB magnet similar to this

1 x extension spring similar to https://www.mcmaster.com/9044K11/

2 x SHCS M2 x 10mm (18-8 SS or similar)

4 x SHCS M3 x 8mm (18-8 SS or similar) (one must be cut down to just the head)

2 x SHCS M3 x 10mm (18-8 SS or similar)

1 x SHCS M3 x 22mm (black oxide or similar)

1 x SHCS M4 x 8mm (black oxide or similar)

2 x BHCS M8 x 8mm (black oxide or similar)

2 x SHCS M6 x 10mm (black oxide or similar)

1 x SHCS M6 x 30mm (black oxide or similar)

I would recommend an M6 tap for securing the chamber to the pivot without risk of delaminating the print.